|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The REMco OreMax VSI crushers are based on the larger size models. The OreMax designation applies to crushers capable of 400 hp and above to the limit of 1,500 hp. These machines are of extra-heavy duty construction and designed for the severe demands of multiple shift continuous service. The bearings, shafts and general construction of these crushers are heavier than all other VSI crushers.
Complimenting the OreMax construction are REMco’s unique CONQUEROR Rotors utilizing tungsten carbide wear parts and REMco’s patented ARC-tip which can provide rotor service intervals of 1,000 hours or more between changes. OreMax units are supplied standard with SmartBox, machine management, oil / lubrication, and machine safety systems.
   
To enlarge, click on image
The OreMax is available as a fully-autogenous, semi-autogenous or anvil type crusher. The anvil type units are designated as OreMax - ST/AR machines. The OreMax Pre-mill units are designed for extra-fine crushing and grinding.
Maximum recommended feed size will vary dependent on type, hardness and shape of rock or ore to be crushed. Typically, maximum feed size is limited to 4” (100 mm) depending on size of the machine, connected drive power and reduction ratio. REMco OreMax units can be used as pre-milling machines before ball mills to eliminate rod mills. Another use for OreMax units is to relieve the crushing load of overworked older cone crushers and produce a finer product for the grinding stages in metal mining and cement operations.
To see REMco OreMax production capacities, Click here ...
 REMco OreMax VSI Crusher
Additional information is available via REMco OreMax Catalog Understanding Capacity Tables, click here Understanding the importance of speed
For more information or to receive a REMco OreMax catalog, contact REMco.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
 |
|
|
© 2013 REMco | All Rights Reserved |
|||