REMco SANDMAX - PRODUCING ALL TYPES OF MANUFACTURED SAND
Do you need sand? Ever since man began to build, he has sought quality sand. Sand that has rounded particles, sand that has a full range of well-graded sizes, sand that finishes smoothly, sand that gives strength and beauty in what man builds.
From the ancients to the present, good natural sand deposits have been exploited and depleted. Now we must crush rock to produce sand for our modern structures. No crushing job is more difficult than producing man-made sand. Prior to the REMco SandMax, a wide range of crusher types have been applied to the task with limited success. The challenge of a quality product, in specification, with high durability, cubical particle shape, and with the desired F.M. (fineness modulus) has caused many crusher failures.
To enlarge, click on image
High strength sand comes from hard rock and hard rock is where the REMco SandMax beats all other crushing machines. For versatility of use, net tons of product, total cost to run, ease of installation, smoothness of operation, reliability and hassle-free performance, the REMco SandMax is superior to all others.
But producing quality specification sand requires more than a crusher, it requires knowledge, a well designed material processing circuit and the willingness to understand that sand production is more than rock crushing. At REMco, we can teach you how to make your sand.
SandMax VSI Crushers -- General Application Guidelines
REMco VSI SandMax crushers are fully autogenous vertical shaft crushing machines designed to operate as third or fourth stage crushers in the processing of all types of rock, ores and minerals. SandMax crushers can be operated in either open-circuit or closed-circuit. Closed-circuit operation is recommended in order to achieve the lowest net operating cost and the highest production of any given size below 1/2" (13 mm).
Looking for the production capacities of the SandMax? Click here...
REMcoSandMax VSI Crusher
Capacity Table in tons per hour - Closed Circuit Operation
Tons of NetScreen Undersize as Measured at Point B by Driven Horsepower (KW)
FEED TOP SIZE FOR FINE, MEDIUM AND COARSE FEEDS ARE FOR ALL PARTICLES HAVING A MAX.
ONE-WAY FEED DIMENSION AS SHOWN BELOW
FEED SIZE
FINE 3/8” - 1” / 10 - 25 mm
MEDIUM 1” - 2” / 25 - 50 mm
COARSE 2” - 3” / 50 - 75 mm
PRODUCT SIZE
3/8”
(10mm)
1/4”
(6mm)
3/16”
(4.75mm)
3/8”
(10mm)
1/4”
(6mm)
3/16”
(4.75mm)
3/8”
(10mm)
1/4”
(6mm)
3/16”
(4.75mm)
DRIVE POWER
30 hp
40 hp
50 hp
6 - 8
8 - 10
13 - 15
5 - 7
6 - 8
9 - 11
3 - 5
5 - 7
7 - 9
60 hp
75 hp
100 hp
17 - 22
30 - 35
43 - 48
13 - 19
25 - 30
37 - 42
11 - 16
22 - 27
32 - 37
15 - 20
28 - 33
32 - 37
13 - 18
23 - 28
33 - 38
10 - 15
18 - 23
27 - 32
125 hp
150 hp
200 hp
60 - 65
72 - 77
90 - 95
50 - 55
60 - 65
75 - 80
43 - 48
52 - 57
65 - 70
55 - 60
65 - 70
80 - 85
46 - 51
55 - 60
65 - 70
38 - 43
45 - 50
55 - 60
250 hp
300 hp
120 - 130
145 - 155
100 - 110
120 - 130
90 - 100
100 - 110
110 - 120
125 - 135
90 - 100
105 - 115
80 - 90
95 - 105
100 - 110
115 - 125
85 - 95
95 - 105
70 - 80
80 - 90
350 hp
400 hp
500 hp
170 - 180
200 - 210
235 - 245
145 - 155
170 - 180
200 - 210
125 - 135
145 - 155
170 - 180
155 - 165
185 - 195
200 - 210
130 - 140
155 - 165
180 - 190
110 - 120
130 - 140
155 - 165
135 - 145
160 - 170
240 - 290
125 - 135
190 - 240
240 - 300
100 - 110
115 - 125
130 - 140
2-300=600 hp
2-350=700 hp
2-400=800 hp
290 - 340
300 - 350
350 - 400
240 - 290
280 - 330
310 - 360
200 - 250
210 - 260
220 - 270
260 - 310
280 - 330
300 - 350
220 - 270
230 - 280
240 - 290
180 - 230
190 - 240
200 - 250
220 - 270
240 - 290
250 - 300
180 - 230
210 - 260
220 - 270
150 - 200
170 - 220
190 - 240
2-500=1,000 hp
2-600=1,200 hp
2-750=1,500 hp
400 - 500
420 - 520
500 - 600
290 - 390
350 - 450
450 - 550
250 - 350
300 - 400
350 - 450
320 - 420
400 - 500
450 - 550
260 - 360
300 - 400
360 - 460
220 - 320
275 - 375
300 - 400
260 - 360
350 - 450
400 - 500
230 - 330
300 - 400
350 - 450
210 - 310
250 - 350
270 - 370
Additional information is available via REMco SandMax Catalog
